How Do I Set Up a Remote Connection to Lasernet 10.2 Server from a Local Machine?

This article describes the setup required to remotely connect to a Lasernet server from a local machine, enabling you to make development changes on your local machine and deploy them to your remote Lasernet server.

Warning

Ensure the Lasernet Server has a public IP address associated with it and a Fully Qualified Domain Name (FDQN). The Lasernet Server and Lasernet Web Client must be installed on your Lasernet server.

Lasernet Server Setup

1. Stop the following Lasernet Services in services.msc.

2. Navigate to C:\ProgramData\Formpipe Software\Lasernet 10\Config\Default.

3. Open ServerSettings.json with Notepad/Notepad++.

4. Under the Server Name, add the FQDN and save the changes.

5. Start the Lasernet Services within services.msc.

6. Open the config.lnlog within C:\ProgramData\Formpipe Software\Lasernet 10\Config\Default. This is the log for the configuration server.

7. Ensure the Listening on https://servername.local.cloudapp.azure.com:33443/ with your FQDN is visible.

Ports

In order to reach your Lasernet server remotely, you must enable the connection to the Lasernet port. The default Lasernet 10 port is 33443.

Note

Please reach out to your IT department regarding the following steps as your security settings may need adjusting.

The following example is the newly opened inbound port in Windows Defender Firewall:

Hosted on Azure

If your server is hosted in Azure, you will need to add an NSG inbound port rule.

Ensure you open port 33443 and pick TCP.

Access Lasernet Web Portal with FQDN

You can access the Web Portal by browsing https://FQDN:33443/lasernet/. In our example, the FQDN is servername.location.cloudapp.azure.com, but yours may vary.

Info

If the "Your connection isn't private" error shows up, select advanced, and click continue to FQDN.com (unsafe).

Connect to the Lasernet Server from Lasernet Developer on a Local Machine

1. Install Lasernet Developer on your local machine and load a valid license into the Developer License Manager.

2. Launch Lasernet Developer on your local machine.

3. Set the server to the FQDN of the server that you created previously and click connect.

4. Enter your login credentials.

The Lasernet Developer on your local machine is now connected to your Lasernet server. You can make developments on the Lasernet developer locally. Any objects that you create will be saved and deployed on the Lasernet server.

Verify Successful Connection

1. Commit and deploy changes on the local machine.

2. Navigate to the browser and access the Web Portal.

3. Log in, select Configurations, and then select your configuration.

4. Select Revisions, and ensure that your revision displays the correct Date and Author.