Login
      Contents x
      Lasernet Cloud Print: Printer Profile Sample Setup (Legacy)
      • 22 Aug 2024
      • 1 Minute to read
      • Contributors
      • Print
      • PDF
      Contents

      Lasernet Cloud Print: Printer Profile Sample Setup (Legacy)

      • Updated on 22 Aug 2024
      • 1 Minute to read
      • Contributors
      • Print
      • PDF
      Article summary

      Use the following step-by-step instructions as an example of setting up Printer profiles.

      1. Install a printer driver on the Lasernet Server (it does not whether the Lasernet Server is installed in the Cloud or on-premises). You must do the same for all printer drivers you wish to use for printing. Therefore, if four different HP printers use the same HP Universal printer driver, you only need to install one printer with that name and printer driver.

      Note

      The printer's name must be the same as the printer driver's name.

      1. Open your Lasernet configuration in the Lasernet Developer.

      2. Navigate to Modules.

      3. Right-click the EMF to Raw engine called Cloud Printer Driver, and then select Duplicate.

      1. Ensure to type the right name for the printer driver for which you need to create Printer profiles, in the Name box. See the following example.

      If you are not sure about the name, try checking the Advanced tab of the Printer Properties dialog. Otherwise, open Dynamics 365 Finance and Operations and print a report to the Cloud printer. Afterwards, you can check the grab file.

      Note

      Grab mode needs to be enabled. See the Lasernet manual to get more information about grab mode.

      1. Open the Setup tab and choose the printer you need from the drop-down list.

      1. Open the Destination tab and add the Azure Storage Printer record.

      1. Close the dialog.

      2. Open the Pass-Through engine called Printer selection.

      1. Open the Destination tab and add the new EMF to Raw engine. Ensure that you add a criterion that is unique to this destination. If needed, also change the existing destination criteria so that they are unique as well. See the following example.

      1. Close the dialog.

      2. Open Printer Profiles.

      1. Add the profiles you need.

      1. Click the Update button on the top menu to update the Lasernet Server.

      2. Open Dynamics 365 Finance and Operations and navigate to Lasernet > Setup > Lists > Printers.

      1. On the top menu of the page, click Update Printers.

      1. Check if the new printer you have added is on the list now.

      2. Navigate to Lasernet > Setup > Lists > Printer Profiles.

      1. Check if the profiles you have added are on the list now.

      2. You can now go ahead and print a report to your cloud printer and select one of the profiles.

      What's Next
      Change password!
      Changing your password will log you out immediately. Use the new password to log back in.
      Change profile
      Success!
      First name must have atleast 2 characters. Numbers and special characters are not allowed.
      Last name must have atleast 1 characters. Numbers and special characters are not allowed.
      Enter a valid email
      Enter a valid password
      Your profile has been successfully updated.
      Logout